/Internal
1K System Primers And Topcoats
Standard Primer
Premium Primer
Clear Topcoat
White Topcoat
Standard Primer
| CODE(S) | WIB925.00S.WHT (Acquafond Stucco Bianco) |
| TYPE | Waterborne white primer for Indoors (Monocomponent). Can be applied with brush. Fast drying, high solid content and good sanding properties |
| KEY INFO | Recommended for furniture, MDF and doors. Typically applied with spray gun |
| FEATURES | The Acquafond stucco white is used for indoor coating cycles for softwoods and MDF. It is suitable for doors , furniture, panels and etc. |
| SUBSTRATE | Raw woods: Always clean well the surfaces, removing all traces of grease, waxes and resins. Maximum wood moisture content should be between 10 and 14%.Surfaces must be sanded with 150-180 grit sanding paper, to avoid fibre swelling. |
| HARDENER | N/A |
Premium Primer
| CODE(S) | WIB915.00S.WHT (HydroSand White Primer) |
| TYPE | Waterborne white primer for Indoors (Mono/Bi-component). Fast drying, good coverage and good sanding properties |
| KEY INFO | Recommended for furniture, MDF and doors. Typically applied with spray gun |
| FEATURES | The HydroSand white primer is used for indoor coating cycles for hardwoods and softwoods. It is suitable for doors , furniture, panels and etc. |
| SUBSTRATE | Raw woods: Always clean well the surfaces, removing all traces of grease, waxes and resins. Maximum wood moisture content should be between 10 and 14%.Surfaces must be sanded with 150-180 grit sanding paper, to avoid fibre swelling. |
| HARDENER | WIH750 (optional) |
Clear Topcoat
| CODE(S) | WIT927.XXS.CLR (Acquasoyz Clear) |
| KEY INFO | Waterborne Clear Topcoat / Self-sealer – Waterborne Conversion Varnish (Mono/Bi-component). Fast drying, high transparency, good touch feeling. Available gloss: 15, 30, 50% |
| FEATURES | It is also a self-sealer used in industrial and handcraft coating cycles for indoors. Easy to use, fast drying, good chemical and physical features. |
| SUBSTRATE | Best results are obtained with the pre-application of sealers like ACQUAFOND HRS CLEAR or ACQUAFOND SOYZ CLEAR (cheaper option). Therefore, proceed, as follows: sand the sealer/s using sandpaper grits 280 -320. |
| HARDENER | WIH750 (optional) |
White Topcoat
| CODE(S) | WIT927.XXS.WHT (Acquasoyz Lack Bianco) |
| KEY INFO | Waterborne Pigmented Topcoat Mono / Bi component white. Fast drying, good verticality, good hardness. Available gloss: 15, 30, 50% |
| FEATURES | The Acquasoyz Lack bianco is used for indoor cycles for hardwoods and softwoods is suitable for doors, furniture, panels and etc |
| SUBSTRATE | Wood treated with white primer: Sand the primer(WBPC White Primer) using sandpaper 320 - 400. The Acquasoyz Lack Bianco is suitable for waterborne basecoat . Is not recommended the application on Nitrocellulose and polyurethane basecoat. |
| HARDENER | WIH750 (optional) |
2K System Primers
Aquapur Fond White
Aquapur Fond Clear
Aquapur Fond White
| CODE(S) | WIB980.00S.WHT (Acquapur Fond 2K Bianco) |
| KEY INFO | Waterborne white primer Bicomponent. High solid content, low VOC, good sanding properties |
| FEATURES | The Acquapur fond 2k white is used for indoor coating cycles for hardwoods and softwoods. It is suitable for doors, furniture and panels. It has a good wetting property and it is easy to sand. Low raising timber hair. |
| SUBSTRATE | Raw woods : Clean the substrate well, removing all wax, grease and resin traces; maximum wood moisture content should be between 10 and 14%.Surfaces must be sanded with 150-180 grit sanding paper, to avoid fibre swelling |
| HARDENER | WIH750 |
Aquapur Fond Clear
| CODE(S) | WIB980.00S.CLR (Acquapur Fond 2K Clear) |
| KEY INFO | Waterborne Transparent Basecoat Bi-component. Fast drying, high transparency, excellent hardness |
| FEATURES | The Acquapur fond 2k clear is used for indoor coating cycles for hardwoods and softwoods. It is suitable for doors, furniture and etc. |
| SUBSTRATE | Raw woods: Clean the substrate well, removing all traces of wax, grease and resin. Maximum wood moisture should be between 10 and 14%.Surfaces must be sanded with 150 -180 grit sanding paper, to avoid fibre swelling. |
| HARDENER | WIH750 |
2K System Topcoats
Aquapur Stone White
Aquapur Stone Clear
Aquapur Opal White
Aquapur Opal Clear
Aquapur Stone White
| CODE(S) | WIT982.XXS.WHT (Acquapur Stone 2K Bianco) |
| KEY INFO | Waterborne topcoat white bi-component, high performance. Good hardness, high covering, high solid build. Available gloss: 15, 30, 50, 99% |
| FEATURES | The Acquapur stone Lack bianco is used for high performance indoor cycles for hard woods and softwoods. |
| SUBSTRATE | Wood treated with Basecoat: Sand the basecoat (Acquapur fond 2K stone only ) using 240 – 320 grit sandpaper. The application on Nitrocellulose and polyurethane basecoat it is not recommended. |
| HARDENER | WIH780 (WIH760 for 50-99% Gloss) |
Aquapur Stone Clear
| CODE(S) | WIT982.XXS.CLR (Acquapur Stone 2K Clear) |
| KEY INFO | Waterborne Topcoat Transparent Bi-component with high performance. High blocking resistance, excellent verticality, high scratch resistance. Available gloss: 15, 30, 50, 99 % |
| FEATURES | Topcoat with excellent performance chemical-physical, easy to apply, low VOC, 0 indoor emission. |
| SUBSTRATE | Raw woods : Clean the substrate well, removing all wax, grease and resin traces; maximum wood moisture content should be between 10 and 14%.Surfaces must be sanded with 150-180 grit sanding paper, to avoid fibre swelling |
| HARDENER | WIH780 (WIH760 for 50-99% Gloss) |
Aquapur Opal White
| CODE(S) | WIT983.XXS.WHT (Acquapur Opal 2K Bianco) |
| KEY INFO | Waterborne White Topcoat for Indoors. High covering, high hardness. Available gloss: 5, 15, 30, 50% |
| FEATURES | Topcoat with incredible chemical and physical performances. It is comparable with solvent base finishes. Easy to apply, very Low VOC content with zero emissions. |
| SUBSTRATE | Wood treated with Basecoat: Sand the basecoat using 320 – 400 grit sandpaper. The application on Nitrocellulose and polyurethane basecoat it is not recommended. |
| HARDENER | WIH780 |
Aquapur Opal Clear
| CODE(S) | WIT983.XXS.CLR (Acquapur Opal 2K Clear) |
| KEY INFO | Waterborne Clear Topcoat for Indoors. Excellent transparency, high hardness. The product has a Food Certificate. Available gloss: 5, 15, 30, 50% |
| FEATURES | Topcoat with incredible chemical and physical performances. It is comparable with solvent base finishes. Easy to apply, very Low VOC content with zero emissions. |
| SUBSTRATE | Wood treated with Basecoat: Sand the basecoat (Acquapur fond 2K clear) using sand paper 240 - 320 grit. |
| HARDENER | WIH780 |
We Offer All Vernites Topcoats In Range Of Colours, See Below Links. Additionally We Can Provide Very Close Colour Match To Main UK Brands. If Your Chosen Colour Is Not Listed
Feel Free To Contact Us.
