/Polyester Lacquers
PO Clear Sealer
| CODE(S) | V/610020 |
| TYPE | Thixotropic Transparent polyester sealer |
| KEY INFO | Good levelling, transparency, thixotropic behaviour without sagging on edges. |
| FEATURES | Suitable for general Use ( MDF, veneer), kitchen and bathroom furniture |
| SUBSTRATE | It is recommended to sand the surface previously with 180-220 grit paper. Make sure the surface is completely clean of dust and without any contaminant (silicone, grease, remains of varnish, etc.) In case of resinous wood and MDF boards, it is recommended to isolate with primer V/110015 PU Clear Primer 015 |
| ACCELERATOR | V/680001 |
| CATALYST | V/690012 |
| THINNER | D1016 (Acetone) |
PO White Sealer
| CODE(S) | V/640026 |
| TYPE | PO white sealer without styrene. |
| KEY INFO | Good extensibility, not sagging, easy sanding and good hiding power |
| FEATURES | Suitable for MDF |
| SUBSTRATE | Apply on MDF. Substrate must be sanded with 180 - 220 grit paper shortly before applying. Make sure the surface is completely clean of dust or any other contaminant (silicone, grease, remains of varnish, etc.) |
| ACCELERATOR | V/680001 |
| CATALYST | V/690012 |
| THINNER | D1016 (Acetone) |
PO Clear Top Coat
| CODE(S) | V/620030 |
| TYPE | Transparent semi gloss Polyurethane Topcoat |
| KEY INFO | High covering power, excellent extensibility, wet gloss effect |
| FEATURES | Suitable for MDF, furniture and internal timber. Recommended for coffins. |
| SUBSTRATE | Apply over PU, PO or UV Sealers. Sealer must be sanded with 320-400 sand paper before the topcoat application in order to get a perfect adherence. Make sure that the surface is clean of dust or any other contaminant (grease, silicone, etc.) |
| ACCELERATOR | V/680001 |
| CATALYST | V/690012 |
| THINNER | D1016 (Acetone) |
