Amicus UK ( Coatings ) Ltd


Waterbased External 1K and 2K Lacquers
‚Äč

Preservatives

The VERNITES waterbased preservatives are coatings that combine aesthetic and protective factors; they contain resins specifically developed to penetrate and protect the lignin and the wood fibres. Moreover, in our formulations there is a special  substance that protects the wood from fungi, molds, bacteria and xylophages. The preservatives are coloured with pigments suitable for outdoor use that reflect the sun's rays. The importance of choosing the right preservative in function of the wood essence and the destiny of the artefact is fundamental for a long lasting application and a guaranteed cycle.
They are divided into two main categories:

  • Preservative primer
  • Preservatives all in one

These can be furtherly divided into:

  • Conifers preservative
  • Hardwood preservative 
The colours available are numerous and are summarized in the preservative stain colour chart. This colour chart consistis of 16 colours, 3 pigmented topcoats and one metallized effect.
Product List Download

Base Coats

The basecoats for exterior are developed for the right balance between aesthetic and functionality. They have to be applied between the preservative and the finishing paint.
They have an excellent filling power and better sanding properties than the finishing topcoat.
The products contain specific substances developed to block the wood extractives (tannins, oils and resins).
They are available in two versions: transparent, enriched with UV filters and antifungal additives capable of increasing the weathering resistance, or pigmented.
They are also available with low viscosity or high thixotropy, for an easier vertical application.
The following series are available:

  • Transparent base coat for dip
  • Transparent base coat tixo mono/bi-component
  • White base coat for dip
  • White base coat tixo mono/bi-component
Product List Download

Top Coats

The topcoats for exterior use are products suitable for the protection and the adornment of artefacts destined for outdoors.
They are enriched with UV filters and formulated using resins with high resistance to weather and air pollution.
Available in several gloss levels with different viscosity valves and typology of resistance/warranty for outdoors. Since a considerable quantity of product per layer is required, most of them have high thixotropy and need to be applied by means of a
mechanical pump.
These products are certified by numerous tests carried out by the most important national and international institutions.
The following series are available:

  • Transparent finishing by brush
  • Transparent finishing tix-tropic mono/bi-component
  • Pigmented finishing by brush
  • Pigmented finishing tix-tropic mono/bi-component
Product List Download